Welcome to the Shenzhen Jiwei Automations Ltd.

+86 755 28407683

Uson-11 Ultrasonic Level Transmitter

Uson-11 Ultrasonic Level Transmitter
  • Uson-11 Ultrasonic Level Transmitter
  • Uson-11 Ultrasonic Level Transmitter
  • Uson-11 Ultrasonic Level Transmitter

Uson-11 Ultrasonic Level Transmitter

 With three selectable measurement range, including 5 meters, 10 meters and 15 meters.

 With temperature compensation function, offers high accuracy and strong adaptability.

 With RS-485 communication interface.

 Special echo signal processing algorism is used, can effectively avoid false echo wave.

 With IP66/IP67 Ingress Protection rating.

 Probe made of corrosion-resistant PVDF, suitable for corrosive liquids and applications under corrosive environment.

 High cost-effective ratio, low maintenance cost.

 EMC design of the product complies with IEC61000-4 (GB/T 17626.2) standard in EFT (LT: A), ESD (LT: A) and surge.

  • Uson-11 Ultrasonic Level Transmitter is designed for continuous level measurement for various tanks/pools under non-flammable or non-explosive gas environment. It is suitable for installing in large water tanks/pools, trenches, storage tanks, and vessels. With a non-contact sensor, it is easy to install and easy to maintain. It is widely used in a variety of continuous level measurement applications, such as sewage treatment, chemical industry, coal-fired power plant and marine transportation, etc.


  • The transducer in Uson-11 Ultrasonic Level Transmitter sends out high frequency ultrasonic pulses. When a pulse hits liquid surface, it is reflected back. The reflected ultrasonic wave is received by the transducer and converted into an electronic signal. The time interval between transmitted ultrasonic pulse and received ultrasonic pulse is directly proportional to the distance between transducer and liquid surface. The relationship between sound wave travel distance S, travel speed C and time interval T can be expressed by a formula: S=C×T/2.


  •  With three selectable measurement range, including 5 meters, 10 meters and 15 meters.

     With temperature compensation function, offers high accuracy and strong adaptability.

     With RS-485 communication interface.

     Special echo signal processing algorism is used, can effectively avoid false echo wave.

     With IP66/IP67 Ingress Protection rating.

     Probe made of corrosion-resistant PVDF, suitable for corrosive liquids and applications under corrosive environment.

     High cost-effective ratio, low maintenance cost.

     EMC design of the product complies with IEC61000-4 (GB/T 17626.2) standard in EFT (LT: A), ESD (LT: A) and surge.


  • Measurement range

    5m, 10m, 15m

    Transducer

    StandardABS

    Anti-corrosionPVDF

    Dead zone

    0.3m (5m/10m)

    0.6m (15m)

    Resolution

    ±0.5% of the measurement range

    Beam angle

    6°(5m)

    8° (10m)

    10° (15m)

    Accuracy

    1%

    Display

    LCD

    Buttons

    Three

    Rated input voltage

    85264V AC 50/60Hz

    1830V DC

    Signal output

    Two-wire 420mA

    Four-wire 420mA

    OptionalRS-485/Relay output

    Relay contact rating

    4A 250V AC/30V DC

    Ambient temperature

    -2060

    Process temperature

    -2080

    Process pressure

    Normal

    Cable entry

    M20×1.5

    External housing

    Aluminum alloy

    Process fitting

    Thread

    Flange

    Ingress Protection rating

    IP66/IP67

  •  In various open pools, such as sewage water tank/pool, or for hydraulic and hydrological survey in reservoir, river and lake, etc.

     Applications under corrosive environment, such as biochemical reaction pool and sedimentation tank, etc.


  • Uson-11 Ultrasonic Level Transmitter



  • Uson-11 Ultrasonic Level Transmitter

Online Service
Service Service Service Service
Scan the QR code to the mobile Web

x